Eşyalarını Tamir Et Topluluk Mağaza

Connettore Lightning e jack cuffie dell'iPhone 5

Sonraki adım

Adım 1 çevriliyor

Kılavuza Dön
İngilizce
İtalyanca
Adım 1
iPhone 5 Lightning Connector and Headphone Jack Replacement: adım 0, 1 resimden 1.

  • Remove the following screws securing the Lightning connector assembly to the rear case:

  • One 2.9 mm Phillips screw

  • During re-installation, make sure that the headphone jack's plastic protrusion lies above the metal washer.

  • One 1.5 mm Phillips screw

  • Two 3.3 mm Phillips screws

Separa con delicatezza il gruppo altoparlante dal cavo a nastro del connettore Lightning.

Se stai sostituendo il connettore Lightning con uno nuovo, assicurati di trasferire l'involucro di gomma attorno al microfono. Puoi farlo usando uno spudger.

-[* black] Gently peel the speaker assembly away from the Lightning connector ribbon cable.
-[* icon_note] If you are replacing the Lightning connector with a new part, make sure to transfer the rubber casing around the microphone. You can do this using a spudger.
+[* black] Remove the following screws securing the Lightning connector assembly to the rear case:
+ [* red] One 2.9 mm Phillips screw
+ [* icon_reminder] During re-installation, make sure that the headphone jack's plastic protrusion lies above the metal washer.
+ [* orange] One 1.5 mm Phillips screw
+ [* yellow] Two 3.3 mm Phillips screws

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.