Ana içeriğe geç

ZTE ZMax Pro Back Panel Assembly Replacement

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 7 kılavuzları etkileyecektir.

İngilizce
Çince

Adım 8 çevriliyor

Adım 8
ZTE ZMax Pro Back Panel Assembly Replacement: adım 0, 1 resimden 1.
  • Flip the phone over so that the screen is facing up.

  • Wedge the plastic opening tool between the screen and the rear panel.

  • Push up on the opening tool to separate the panel from the phone.

  • Continue to do this around the entire phone until the rear panel is no longer connected to the device.

  • The rear case and screen are fastened tightly to each other. It might help to use the picks as wedges to keep the case and screen separated as you run the opening tool along the edges.

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.