Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.
Adım 5 çevriliyor
Adım 5
-
Peel the backing off of the adhesive back of the small temperature sensor board.
-
Adhere the temperature sensor board to an exposed, metal area of the surface of the SSD, as close as possible to the SATA connector.
-
Fold the excess temperature sensor wires so that they are out of the way while you install the enclosure.
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.