Nintendo Switch Right Joy Con Sensor Rail Replacement

Adım 3 çevriliyor

İngilizce

Flemenkçe

Adım 3

Use a JIS 000 screwdriver or an official iFixit PH 000 driver to remove the four 3.7 mm screws securing the right Joy Con rail to the frame of the device.
These screws are torqued down and can be difficult to remove. To prevent them from stripping, apply firm downward force, work slowly and try a different screwdriver if the screws won't come out.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.