Eşyalarını Tamir Et Topluluk Mağaza

任天堂Switch的右侧Joy Con手柄滑轨的更换

Kılavuza Dön
İngilizce
Çince
Adım 3
Nintendo Switch Right Joy Con Sensor Rail Replacement: adım 0, 1 resimden 1.

  • Use a JIS 000 screwdriver or an official iFixit PH 000 driver to remove the four 3.7 mm screws securing the right Joy Con rail to the frame of the device.

  • These screws are torqued down and can be difficult to remove. To prevent them from stripping, apply firm downward force, work slowly and try a different screwdriver if the screws won't come out.

使用一把 JIS 000 的螺丝刀来移除把 Joy-Con 滑轨固定在机身侧边的 4 个 3.7 mm 的螺丝。

这些螺丝被拧地很紧，很难被移除。拧的时候，确保使用的是 JIS 螺丝刀而不是 Philips 螺丝刀。不然的话，有滑丝的风险。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.