Eşyalarını Tamir Et Topluluk Mağaza

MacBook Pro 15" Touch Bar eind 2016 Vervanging van het scherm

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.

Kılavuza Dön
İngilizce
Flemenkçe
Adım 7
MacBook Pro 15" Touch Bar Late 2016 Screen Replacement: adım 0, 3 resimden 1. MacBook Pro 15" Touch Bar Late 2016 Screen Replacement: adım 0, 3 resimden 2. MacBook Pro 15" Touch Bar Late 2016 Screen Replacement: adım 0, 3 resimden 3.

  • Disconnect all three antenna cables by prying each one straight up from its socket.

  • Slide your tweezers or the flat end of your spudger underneath each cable until it's near the socket, and then gently twist or pry up to disconnect it.

  • To reconnect each cable, align the connector directly over its socket, and then press down so it snaps into place.

Koppel all drie de antennekabels los door deze in een rechte beweging uit hun contact omhoog te duwen.

Schuif je pincet of het platte einde van je spudger onder iedere kabel totdat deze dicht bij de aansluiting zit en kantel of draai je spudger dan om de aansluiting los te koppelen.

Om iedere kabel weer aan te sluiten, breng je de aansluitingen op de juiste positie boven het contact en druk je deze omlaag totdat deze zich vast klikt.

[* black] Disconnect all three antenna cables by prying each one straight up from its socket.
- [* black] Slide your tweezers or the flat end of your spudger underneath each cable until it's near the socket, and then gently twist or pry up to disconnect it.
+ [* black] Slide your [product|IF145-020|tweezers] or the flat end of your spudger underneath each cable until it's near the socket, and then gently twist or pry up to disconnect it.
[* icon_reminder] To reconnect each cable, align the connector directly over its socket, and then press down so it snaps into place.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.