Ana içeriğe geç

MacBook Pro 13" (2012年底)背盖更换

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 47 kılavuzları etkileyecektir.

İngilizce
Çince

Adım 1 çevriliyor

Adım 1
MacBook Pro 13" Retina Display Late 2012 Lower Case Replacement: adım 0, 1 resimden 1.
  • Remove the following ten screws securing the lower case to the upper case:

  • Two 2.3 mm P5 Pentalobe screws

  • Eight 3.0 mm P5 Pentalobe screws

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your device.

将固定在顶盖和背盖的螺丝卸除:

两个 2.3mm的P5五角螺丝

八个3.0mm的P5五角螺丝

在整个维修过程中,这款磁性工作垫可以让每颗螺丝都能被磁力吸附,以帮助你将这些螺丝正确地安装回去,以免损坏设备。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.