Ana içeriğe geç

Reemplazo de la batería para MacBook Pro 13" Unibody de mediados de 2009

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 6 kılavuzları etkileyecektir.

Adım 3 çevriliyor

İngilizce
İspanyolca
Adım 3
MacBook Pro 13" Unibody Mid 2009 Battery Replacement: adım 0, 1 resimden 1.
  • Lift the battery out of the upper case.

  • If you're installing a new battery, you should calibrate it after installation:

  • Charge it to 100%, and then keep charging it for at least 2 more hours. Next, unplug and use it normally to drain the battery. When you see the low battery warning, save your work, and keep your laptop on until it goes to sleep due to low battery. Wait at least 5 hours, then charge your laptop uninterrupted to 100%.

  • If you notice any unusual behavior or problems after installing your new battery, you may need to reset your MacBook's SMC.

Levanta la batería fuera de la caja superior.

Si estás instalando una batería nueva, debes calibrarla luego de la instalación.

Cárgala hasta el 100% y luego sigue cargándola durante al menos 2 horas más. Luego, desenchúfala y úsala normalmente para drenar la batería. Cuando veas la advertencia de batería baja, guarda tu trabajo y mantén tu laptop encendida hasta que se duerma. Espera al menos 5 horas, luego cárgala de forma ininterrumpida hasta 100%.

Si notas alguna conducta o problema inusual luego de instalar tu batería nueva, podrías necesitar restablecer el SMC de tu MacBook Pro.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.