Ana içeriğe geç

iMac (21,5 Zoll, 2019, Retina 4K Display, Intel) Displayeinheit tauschen

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 10 kılavuzları etkileyecektir.

İngilizce
Almanca
Adım 3
iMac Intel 21.5" Retina 4K Display 2019 Display Assembly Replacement, Slice through the display adhesive: adım 0, 3 resimden 1. iMac Intel 21.5" Retina 4K Display 2019 Display Assembly Replacement, Slice through the display adhesive: adım 0, 3 resimden 2. iMac Intel 21.5" Retina 4K Display 2019 Display Assembly Replacement, Slice through the display adhesive: adım 0, 3 resimden 3.
Slice through the display adhesive
  • Use the tool like a pizza cutter—roll it along the gap, cutting the foam adhesive in between the frame and display.

  • Be sure to always push with the cutting wheel forward. If you pull, the wheel might get pulled out of the handle.

  • Run the tool up along the left side of the display.

Benutze das Werkzeug wie einen Pizzaschneider - rolle es entlang des Schlitzes zwischen Bildschirm und Gehäuse, um den Schaumkleber zu durchschneiden.

Stelle sicher, dass du den Griff immer hinter dem Rad hinterher schiebst. Ansonsten könnte das Rad aus dem Griff herausrutschen.

Fahre mit dem Werkzeug entlang der linken Displayseite.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.