Eşyalarını Tamir Et Topluluk Mağaza

iMac 2019 ディスプレイの外し方

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 10 kılavuzları etkileyecektir.

Önceki adım

Adım 3 çevriliyor

Kılavuza Dön
İngilizce
Japonca
Adım 3
iMac 2019 Display Separation: adım 0, 3 resimden 1. iMac 2019 Display Separation: adım 0, 3 resimden 2. iMac 2019 Display Separation: adım 0, 3 resimden 3.

  • Lift the display up from the frame and remove it from the iMac.

  • It may be necessary to slowly lift from one side to peel against the remaining adhesive.

  • Be very careful handling the display—it's big, heavy, and made of glass.

  • After the adhesive is cut, it cannot be used to re-seal the display in place. Follow this guide to replace the adhesive strips that secure the display to the rear enclosure.

ディスプレイをフレームから持ち上げて、iMacから外します。

片側をゆっくりと持ち上げて、接着剤を剥がしながら外してください。

ディスプレイの取り扱いには特にご注意ください。ーディスプレイは大型で重量があり、ガラス製です。

接着剤を切開した後は、ディスプレイを固定するための接着剤の再利用ができません。このガイドを参照して、接着ストリップを交換して、背面エンクロージャーとディスプレイをしっかりと固定してください。

[* black] Lift the display up from the frame and remove it from the iMac.
[* black] It may be necessary to slowly lift from one side to peel against the remaining adhesive.
[* icon_caution] Be very careful handling the display—it's big, heavy, and made of glass.
-[* icon_reminder] After the adhesive is cut, it cannot be used to re-seal the display in place. Follow [guide|136337|this guide|new_window=true] to replace the adhesive strips that secure the display to the rear enclosure.
+[* icon_reminder] After the adhesive is cut, it cannot be used to re-seal the display in place. Follow [guide|137411|this guide] to replace the adhesive strips that secure the display to the rear enclosure.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.