Ana içeriğe geç

iMac 27" 2017 디스플레이 어셈블리 교체

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 7 kılavuzları etkileyecektir.

İngilizce
Korece

Adım 18 çevriliyor

Adım 18
iMac 27" 2017 Display Assembly Replacement: adım 0, 3 resimden 1. iMac 27" 2017 Display Assembly Replacement: adım 0, 3 resimden 2. iMac 27" 2017 Display Assembly Replacement: adım 0, 3 resimden 3.
  • With the cards inserted as shown near the corners, gently twist the cards to increase the gap between display and case.

  • If there are any sections that seem to stick and won't separate, stop twisting and use one of the cards to cut the adhesive in the problem area.

  • Begin to lift the top of the display up from the frame.

  • Only lift the display a few inches—it is still attached to the iMac by data and power cables.

보이는 바와 같이 카드들이 모서리 근처에 삽입된 상태에서 카드를 옆으로 살살 비틀어 디스플레이와 케이스 사이의 간격을 늘리세요.

여전히 붙어서 떨어지지 않는 부분이 있으면 비틀기를 멈추고 카드 중 하나를 사용하여 문제 지점의 접착제를 자르세요.

프레임에서 디스플레이 상단을 들어 올리기 시작하세요.

디스플레이를 몇 인치만 들어올리세요—디스플레이는 데이터와 전원 케이블로 여전히 iMac에 연결되어 있습니다.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.