Ana içeriğe geç

2017年款27寸iMac 显示屏更换

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 7 kılavuzları etkileyecektir.

İngilizce
Çince

Adım 18 çevriliyor

Adım 18
iMac 27" 2017 Display Assembly Replacement: adım 0, 3 resimden 1. iMac 27" 2017 Display Assembly Replacement: adım 0, 3 resimden 2. iMac 27" 2017 Display Assembly Replacement: adım 0, 3 resimden 3.
  • With the cards inserted as shown near the corners, gently twist the cards to increase the gap between display and case.

  • If there are any sections that seem to stick and won't separate, stop twisting and use one of the cards to cut the adhesive in the problem area.

  • Begin to lift the top of the display up from the frame.

  • Only lift the display a few inches—it is still attached to the iMac by data and power cables.

如图所示,在插卡插入到角落的地方时,轻轻地扭转插卡以增加显示屏和外壳之间的间隙。

如果有任何部分似乎粘着并且不会分开,请停止扭曲并使用其中一张卡片在有问题的地方剪掉粘合剂。

开始从框架上抬起显示器的顶部。

仅将显示器抬起几英寸——它仍通过数据线和电源线连接到iMac。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.