-
It may help to apply heat to the back cover using either a heat gun or an iOpener before starting to remove the cover.
-
Use a plastic opening pick to pry into the crease between the back cover and the midframe of the phone.
-
Move all the way around the phone until the back cover is separated from the rest of the phone.
-
The images show a metal spudger being used to pry open the back cover. However, this process is not recommended, as it poses a puncture risk to the battery.
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.
Kılavuz Adımlarını Düzenlemek için Klavye Kısayolları:
Ctrl + N
Bir sonraki satır
Ctrl + P
Bir önceki satır
Ctrl + Shift + N
Aşağıya yeni bir satır ekle
Ctrl + Shift + P
Yukarıya yeni bir satır ekle
Ctrl + ]
Mevcut satırı girintili yap
Ctrl + [
Mevcut satır girintisini kaldır
Ctrl + D
Mevcut satırı sil
Shift + ;
Sonraki adıma git.
Shift + H
Önceki adıma git.
Bütün kısayolları göster