Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.
Adım 8 çevriliyor
Adım 8
-
The right side of bottom case should separate from the top case when you remove the sliding shaft.
-
Slide the top case to the right to separate the joint.
-
Weave the wires and ribbons through the wire hinge to completely separate the top and bottom casings.
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.