Eşyalarını Tamir Et Topluluk Mağaza

Google Pixel 4a 스크린 교체하기

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 11 kılavuzları etkileyecektir.

Önceki adım

Adım 15 çevriliyor

Kılavuza Dön
İngilizce
Korece
Adım 15
Google Pixel 4a Screen Replacement, Remove the screen: adım 0, 3 resimden 1. Google Pixel 4a Screen Replacement, Remove the screen: adım 0, 3 resimden 2. Google Pixel 4a Screen Replacement, Remove the screen: adım 0, 3 resimden 3.
Remove the screen

  • Remove the screen.

  • To install a new screen:

  • Check if your replacement screen has speaker mesh and top edge adhesive pre-installed.

  • If it does, you won't need the top edge adhesive.

  • If it doesn't, remove the larger clear liner from the top edge adhesive and apply it to the screen (not the frame). Make sure the larger cutout lines up with the speaker mesh.

  • Follow this guide to apply the custom-cut adhesive.

  • Use the third photo as a reference to position your adhesives.

  • During the boot-up process after reassembly, the screen will go through a calibration sequence. Don't touch the screen during this process, as it could result in improper touch calibration and create touch issues.

스크린 분리하기

스크린을 분리하세요.

교체한 스크린과 원래 스크린을 비교하세요. 추가 부품을 (스피커 메시 등) 새 부품으로 옮겨야 할 수도 있습니다.

새 스크린을 설치하려면:

프레임 주변에서 남은 접착제를 긁어내세요.

맞춤형 접착제를 사용하는 경우 이 안내서를 따르세요.

Tesa/테사 테이프와 같은 양면 테이프를 사용하는 경우 이 안내서를 따르세요.

이소프로필 알코올을 사용하여 디스플레이에서 접착제를 닦을 경우 접착력이 약해질 수 있으므로 의도하지 않은 부품에 알코올이 뭍지 않도록 주의하세요.

재조립 후 부팅하는 동안 스크린이 보정 과정을 거치게 됩니다. 터치 보정이 잘못되어 터치 문제가 발생할 수 있으므로 이 과정에서 스크린을 만지지 마세요.

[title] Remove the screen
[* black] Remove the screen.
-[* black] Compare your replacement screen with the original. You may need to transfer additional components (such as speaker mesh) to the new part.
-[* icon_reminder] To install the new screen:
- [* black] Scrape off remaining adhesive from the perimeter of the frame.
- [* black] [guide|126585|Follow this guide|new_window=true] if you are using custom-cut adhesives.
- [* black] If you are using double-sided tape such as Tesa tape, [guide|113604|follow this guide|new_window=true].
- [* icon_caution] If you use isopropyl alcohol to clean the adhesive off the display, be sure to not let it splash onto any unintended components, as this can weaken their adhesive bond.
-[* icon_reminder] During the boot-up process after reassembly, the screen will go through a calibration sequence. Do not touch the screen during this process, as it could result in improper touch calibration and create touch issues.
+[* icon_reminder] To install a new screen:
+ [* red] Check if your replacement screen has speaker mesh and top edge adhesive pre-installed.
+ [* black] If it does, you won't need the [link|https://guide-images.cdn.ifixit.com/igi/URl4UmAoxJKgCBvy.full|top edge adhesive|new_window=true].
+ [* black] If it doesn't, remove the larger clear liner from the [link|https://guide-images.cdn.ifixit.com/igi/URl4UmAoxJKgCBvy.full|top edge adhesive|new_window=true] and apply it to the ***''screen''*** (not the frame). Make sure the larger cutout lines up with the speaker mesh.
+ [* black] Follow [guide|126585|this guide|new_window=true] to apply the custom-cut adhesive.
+ [* icon_note] Use the third photo as a reference to position your adhesives.
+[* icon_caution] During the boot-up process after reassembly, the screen will go through a calibration sequence. Don't touch the screen during this process, as it could result in improper touch calibration and create touch issues.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.