Eşyalarını Tamir Et Topluluk Mağaza

Demontage van de Oculus Quest 2

Kılavuza Dön
İngilizce
Flemenkçe
Adım 8
Oculus Quest 2 Disassembly, Remove the Bluetooth antenna: adım 0, 3 resimden 1. Oculus Quest 2 Disassembly, Remove the Bluetooth antenna: adım 0, 3 resimden 2. Oculus Quest 2 Disassembly, Remove the Bluetooth antenna: adım 0, 3 resimden 3.
Remove the Bluetooth antenna

  • Remove two P000, 4.8 mm long screws.

  • Remove four P000, 4.8 mm long screws.

  • Remove two P000, 10.7 mm long screws.

  • The arrow points to the Bluetooth antenna. To disconnect see step 5 of the Guide. Go to picture 2. To disconnect the cable, slide a thin, ESD-safe pry tool or tweezers under the metal neck of the connector and lift straight up from the board.

  • Picture 3. Remove the antenna from the headset.

Verwijder de Bluetooth-antenne

Koppel de Bluetooth-antenne los.

Verwijder de twee in de afbeelding met oranje gemarkeerde P0-schroeven.

Verwijder de vier in de afbeelding met geel gemarkeerde P0-schroeven.

Verwijder de twee in de afbeelding met groen gemarkeerde P0-schroeven.

Til de antenne van de headset weg en verwijder deze.

[title] Remove the Bluetooth antenna
-[* red] Unplug the Bluetooth antenna.
-[* orange] 2x P0 screws
-[* yellow] 4x P0 screws
-[* green] 2x P0 screws
-[* black] Lift the antenna away from the headset.
+[* orange] Remove two P000, 4.8 mm long screws.
+[* yellow] Remove four P000, 4.8 mm long screws.
+[* green] Remove two P000, 10.7 mm long screws.
+[* red] The arrow points to the Bluetooth antenna. To disconnect see step 5 of the Guide. Go to picture 2. To disconnect the cable, slide a thin, ESD-safe pry tool or tweezers under the metal neck of the connector and lift straight up from the board.
+[* black] Picture 3. Remove the antenna from the headset.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.