Ana içeriğe geç

Oculus Quest 2 拆解

İngilizce
Çince
Adım 3
Oculus Quest 2 Disassembly, Detach ZIF Connector: adım 0, 3 resimden 1. Oculus Quest 2 Disassembly, Detach ZIF Connector: adım 0, 3 resimden 2. Oculus Quest 2 Disassembly, Detach ZIF Connector: adım 0, 3 resimden 3.
Detach ZIF Connector
  • The ribbon cable is lightly attached to the headset with adhesive and the cable is connected with a ZIF connector. Consult Step 1 of the Recognizing & Disconnecting Cable Connectors guide (RDCC guide) for ZIF connector info.

  • Use the tip of a spudger to flip up the locking flap to release the cable. See pictures 2 and 3 to understand how the flap operates.

  • The cable is lightly adhered to the headset so be careful when removing it.

  • During reassembly, make sure to position the cable correctly. Latching the small black clip back on shouldn't require much force. If you don't connect the cable correctly, the headset's screen may stay black and the device will turn off after a few seconds.

排线(图1 Ribbon)通过ZIF接口连接并通过胶块(图1 Adhesive)粘附到头显上。请参考认识和断开线缆连接头指南 步骤1来了解ZIF接口。

使用撬棒的尖端翻起锁定挡板(图1 Locking Flap)以断开排线。请参阅图2和3了解挡板的操作方式。

排线轻轻粘附在头显上,断开时请小心操作。

在重新组装过程中,确保排线定位准确。将锁定挡板(图2和3所示黑色小片)卡回原处不需要太大的力。 如果您没有正确连接线缆,头显可能会保持黑屏并会在几秒钟后关闭。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.