Oculus Quest 2 拆解

İngilizce

Çince

Adım 13 çevriliyor

Adım 13

Disconnect Top Cameras

Disconnect the ZIF connectors for the top cameras
The ZIF connector is shown in the second picture. A spudger should be used to push up the locking flap as shown by the red arrow.
When the flap is open the ribbon cable may be pulled from the connector.
Remember to do both camera ZIF connectors.
When reassembling, note that the camera covers are unique to each side. The holes in the covers should be pointed up and in the proper location.

断开顶部相机

断开顶部相机的ZIF接口(图示Top Cameras)。
如图2所示的ZIF接口应使用撬棒来翻开红色箭头指向的锁定片。
锁定片打开后才能拉开排线。
记住要断开每个相机ZIF接口
组装时，注意两边相机外壳是独一无二的，外壳的孔应指向上方并将其对准正确的位置。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.