Ana içeriğe geç

Remplacement de l'ensemble écran de l'iPhone 12 Pro

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 8 kılavuzları etkileyecektir.

İngilizce
Fransızca

Adım 18 çevriliyor

Adım 18
iPhone 12 Pro Display Assembly Replacement, Disconnect the battery: adım 0, 2 resimden 1. iPhone 12 Pro Display Assembly Replacement, Disconnect the battery: adım 0, 2 resimden 2.
Disconnect the battery
  • Use a spudger or a clean fingernail to pry the battery connector up from its socket on the logic board.

  • Try not to damage the black silicone seal surrounding this and other board connections. These seals provide extra protection against water and dust intrusion.

  • Bend the connector slightly away from the logic board to prevent it from accidentally making contact with the socket and providing power to the phone during your repair.

Prenez une spatule (spudger) ou un ongle propre pour soulever le connecteur de la batterie de sa prise sur la carte mère.

Essayez de ne pas abîmer les joints en silicone noir qui entourent cette connexion et d'autres sur la carte mère. Ils assurent une protection supplémentaire contre l'intrusion d'eau et de poussière.

Repliez légèrement le connecteur par rapport à la carte mère pour l'empêcher de faire accidentellement contact avec la prise et d'alimenter le téléphone pendant votre réparation.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.