Ana içeriğe geç

2020年末带两个 Thunderbolt 端口13寸MacBook Pro 底壳更换

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 10 kılavuzları etkileyecektir.

İngilizce
Çince
Adım 5
MacBook Pro 13" Two Thunderbolt Ports Late 2020 Lower Case Replacement: adım 0, 3 resimden 1. MacBook Pro 13" Two Thunderbolt Ports Late 2020 Lower Case Replacement: adım 0, 3 resimden 2. MacBook Pro 13" Two Thunderbolt Ports Late 2020 Lower Case Replacement: adım 0, 3 resimden 3.
  • Insert your opening pick once again under the front edge of the lower case, near one of the two centermost screw holes.

  • Give the pick a firm twist to pop free the third clip securing the lower case to the chassis.

  • Repeat this procedure near the other of the two centermost screw holes, popping the fourth clip free.

再次将撬片插​​入下壳前缘下方,靠近两个最中心的螺丝孔之一。

用力扭动拨片,将第三个夹子固定到机箱上。

在两个最中心的螺丝孔中的另一个附近重复此过程,弹出第四个夹子。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.