Autosampler Battery and Node Enclosure Assembly (2021)

Adım 10 çevriliyor

İngilizce

Korece

Adım 10

Attach the Battery Wire to the Board

Take the two wires from the 2-pin female amphenol battery box connector and screw them into the board.
Screw the red power wire into the topmost terminal on the bottom 6-pin connector.
Screw the black ground wire into the terminal directly below the red wire.
Ensure that the exposed copper portions of the wire are secure and do not touch.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.