Adım 11 çevriliyor
Adım 11
Attach the 2-pin Sampler Wires to the Board
-
Screw the red power and black ground wires into the board from the 2-pin amphenol connector that attaches directly to the sampler.
-
Screw the black ground wire into the terminal 2 up from the bottom terminal of the top connector.
-
Screw the red power wire into the terminal 1 up from the bottom of the bottom connector.
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.