Eşyalarını Tamir Et Topluluk Mağaza

Sustitución de Sony H.ear en 3 Ear Cup

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 6 kılavuzları etkileyecektir.

Kılavuza Dön
İngilizce
İspanyolca
Önceki adım

Adım 2 çevriliyor

Adım 2
Sony H.ear on 3 Right Ear Pad replacement, Unclip the Right Ear Pad: adım 0, 3 resimden 1. Sony H.ear on 3 Right Ear Pad replacement, Unclip the Right Ear Pad: adım 0, 3 resimden 2. Sony H.ear on 3 Right Ear Pad replacement, Unclip the Right Ear Pad: adım 0, 3 resimden 3.
Unclip the Right Ear Pad

  • The pad is attached by 6 clips in a hexagonal pattern, shown by the arrows.

  • Starting from the top, insert an opening pick in between where the cup leather meets the plastic casing, push it in firmly, then twist it until you disengage the top clip.

  • Try not to damage or peel off the leather while doing this. It helps if you pry towards the speaker housing, not the leather cup.

  • Work round the back side, poking the pick in and twisting to disengage further clips until you can gently pull the cup away.

  • When re-assembling, make sure that the stitching line on the ear pad is facing the bottom.

Retira un auricular

Las orejeras blandas se sujetan a las carcasas de los altavoces con clips.

Hay 6 clips en un patrón hexagonal alrededor de la copa, dos en la parte superior e inferior (la parte más puntiaguda de cada forma de copa) y dos en cualquiera de los lados más largos, en un patrón hexagonal aplastado.

Comenzando desde la parte superior, inserta una púa de apertura en el lugar donde el cuero de la copa se encuentra con la carcasa de plástico, empújala firmemente y luego gírala hasta que desenganches un clip.

Trata de no dañar o despegar el cuero mientras haces esto. Mejor si haces palanca hacia la carcasa del altavoz, no hacia la copa.

Trabaja alrededor de la parte posterior, metiendo la púa y girando para desenganchar más clips hasta que puedas retirar suavemente la copa.

Al volver a armar, asegúrate de que la línea de costura en la almohadilla esté hacia abajo.

-[title] Remove one ear cup
-[* icon_note] The soft ear cups are attached to the speaker casings with clips.
-[* icon_note] There's 6 clips in a hexagonal pattern around the cup, two on the top and bottom (the pointiest part of each cup shape) and two on either of the longer sides, in a squished hexagon pattern.
-[* black] Starting from the top, insert an opening pick in between where the cup leather meets the plastic casing, push it in firmly, then twist it until you disengage a clip.
- [* icon_caution] Try not to damage or peel off the leather while doing this. It helps if you pry towards the speaker housing, not the cup.
+[title] Unclip the Right Ear Pad
+[* red] The pad is attached by 6 clips in a hexagonal pattern, shown by the arrows.
+[* orange] Starting from the top, insert an opening pick in between where the cup leather meets the plastic casing, push it in firmly, then twist it until you disengage the top clip.
+ [* icon_caution] Try not to damage or peel off the leather while doing this. It helps if you pry towards the speaker housing, not the leather cup.
[* black] Work round the back side, poking the pick in and twisting to disengage further clips until you can gently pull the cup away.
-[* black] When re-assembling, make sure that the stitching line on the ear pad is facing the bottom.
+[* icon_note] When re-assembling, make sure that the stitching line on the ear pad is facing the bottom.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.