Eşyalarını Tamir Et Topluluk Mağaza

4. Instalando Klipper en SKR3 EZ

Kılavuza Dön
İngilizce
İspanyolca
Adım 3
4. Installing Klipper on SKR3 EZ: adım 0, 2 resimden 1. 4. Installing Klipper on SKR3 EZ: adım 0, 2 resimden 2.

  • Verify the RPI is connected to your network. Open command prompt and run

  • ping mainsailos.local

  • You should see it return successful pings

  • Open a web browser and go to

  • mainsail.local

  • On the machine tab you can see the IP address of your RPI next to "wlan0"

  • I use Remote Terminal, but using your favorite SSH client login to your RPI with the default credentials

Verifica que el RPI este conectado a tu red. Abre la ventana de comandos y ejecuta:

ping mainsailos.local

Deberías de obtener Retornos de ping correctos

Abre el navegador y ve al URL:

mainsail.local

Abre la pestaña de la maquina (Machine tab) y podras ver la dirección IP de tu RPI alado de "wlan0"

Yo uso el terminal remoto (Remote Terminal), pero usa tu cliente SSH favorito logeate en tu RPI con las credenciales por defecto.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.