Ender 3 / CR20/PRO Y axis Linear rail kit install

İngilizce

İtalyanca

Adım 5 çevriliyor

Adım 5

Slide On & Mount Rails

Note Sliding in the Linear rails do not allow rail block to slide off the end of the rails.
Insert Printed T-nut guide to help with sliding the rail into the top slot on the Y axis extrusion
Slide the rails into the top T-slot
Aline rails with the end of the extrusion using one of the included stiffener plates as a stop

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.