/
Tezgahım

Cihazların için kılavuz, parça ve yanıtlara hızlı erişim edin

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Üye Ol
Giriş Yap

MacBook Air 13" Mitte 2013 Logic Board Einheit austauschen

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 8 kılavuzları etkileyecektir.

Kılavuza Dön
İngilizce
Almanca
Adım 5
MacBook Air 13" Mid 2013 Logic Board Assembly Replacement: adım 0, 2 resimden 1. MacBook Air 13" Mid 2013 Logic Board Assembly Replacement: adım 0, 2 resimden 2.

  • Use the tip of a spudger or your fingernail to flip up the retaining flap on the trackpad ribbon cable ZIF socket.

  • Be sure you are prying up on the hinged retaining flap, not the socket itself.

  • Pull the trackpad ribbon cable straight out of its socket toward the front edge of the Air.

  • During reassembly, ensure that this cable is inserted fully into the connector. If not, your keyboard, trackpad, or battery may not work as expected.

Klappe den Sicherungsbügel am ZIF Anschluss des Trackpad-Flachbandkabels mit der Spudgerspitze oder einem Fingernagel nach oben.

Achte darauf, an dem scharnierartigen Sicherungsbügel zu hebeln und nicht am Anschluss selbst.

Ziehe das Trackpad-Flachbandkabel gerade aus seinem Anschluss heraus in Richtung der vorderen Kante des Gerätes.

[* black] Use the tip of a spudger or your fingernail to flip up the retaining flap on the trackpad ribbon cable ZIF socket.
[* icon_caution] Be sure you are prying up on the hinged retaining flap, ***not*** the socket itself.
[* black] Pull the trackpad ribbon cable straight out of its socket toward the front edge of the Air.
+[* icon_reminder] During reassembly, ensure that this cable is inserted fully into the connector. If not, your keyboard, trackpad, or battery may not work as expected.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.