Eşyalarını Tamir Et Topluluk Mağaza

Amazon Echo Dot (3. Generation) Gehäuse austauschen

Kılavuz Bilgisi

= Bitti = Eksik
İngilizce
Almanca
    This guide will walk you through step by step instructions on how to replace the casing of the Amazon Echo Dot 3rd Generation. This repair is needed if the casing of the Echo Dot is damaged, cracked, or suffering from wear and tear. The process involves removing the adhesive, unscrewing four screws, and separating the casing. No special skills are necessary for this, but basic tools are required, such as a spudger and screwdriver. Make sure that the device is powered off and unplugged before starting this guide.
      To reassemble your deviceEcho Dot, follow these instructions in reverse order. Ensure the casing fits properly before tightening the screws back on. Once reassembly is finished, check that the device powers on and functions correctly.

      Kılavuz Adımları

      Adım 1

      Drehe deinen Echo Dot um, sodass der Strichcode nach oben zeigt.

      Adım 2

      Verwende einen Spudger, um die Klebeverbindung zwischen Gerät und Hülle zu lösen.

      Adım 3

      Entferne die vier silbernen 7,2 mm langen Schrauben mit einem T6 Torx Schraubendreher.

      Adım 4

      Hebe das Gehäuse des Echo Dot an, um es vom Gerät zu entfernen.

      Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.