Ana içeriğe geç

iMac Intel 21.5" EMC 2544 디스플레이 교체

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 16 kılavuzları etkileyecektir.

Adım 18 çevriliyor

İngilizce
Korece
Adım 18
iMac Intel 21.5" EMC 2544 Display Replacement: adım 0, 3 resimden 1. iMac Intel 21.5" EMC 2544 Display Replacement: adım 0, 3 resimden 2. iMac Intel 21.5" EMC 2544 Display Replacement: adım 0, 3 resimden 3.
  • With both plastic cards inserted as shown near the corners, gently twist the cards sideways to increase the gap between display and case.

  • If there are any sections that seem to stick and won't separate, stop twisting and use one of the cards to cut the remaining adhesive.

  • Begin to lift the top of the display up from the frame.

  • Only lift the display a few inches—the display data and power cables are still connected to the logic board.

사진처럼 모서리 근처에 두 플라스틱 카드를 끼운 상태에서 카드를 살살 비틀어 디스플레이와 케이스 사이의 간격을 넓히세요.

만약 단단히 붙어 분리되지 않는 부분이 있으면 비틀기를 멈추고 카드 중 하나를 사용하여 나머지 접착제를 잘라내세요.

디스플레이 상단을 프레임에서 들어 올리기 시작하세요.

디스플레이를 몇 인치만 들어 올리세요—디스플레이 데이터 및 전원 케이블은 여전히 로직 보드에 연결되어 있습니다.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.