Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.
Adım 9 çevriliyor
Adım 9
-
Loosen 2 screws at the top ends of 2 retaining clips for the antenna connectors.
-
Remove the two screws at the bottom ends of these clips and remove the clips.
-
You can now remove the bug filter.
-
If you will need to remove the arms, lift off the U.FL antenna connectors on the side that you need to work on.
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.