Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.
Adım 10 çevriliyor
Adım 10
Removing the GPS module
-
Lift off the the GPS U.FL antenna connectors.
-
Remove a screw on either side of the GPS unit. These have very fine Phillips heads, smaller than 000. One of the heads may be covered with a black coating which should be scraped off
-
Remove the retainer clip which the screw on the right secured. The top of the clip is held by the board.
-
Lift off the connector which the clip retained. You can now remove the GPS unit.
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.