Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.
Adım 3 çevriliyor
Adım 3
Separate the cable adhesive
-
Use blunt-nose tweezers or your fingers to peel the Touch ID sensor cable from the frame.
-
If your new Touch ID sensor's cable comes with adhesive, remove the plastic liner and press the cable into place on the frame.
-
If the cable doesn't have adhesive, use a strip of double-sided tape to secure it to the frame.
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.