Eşyalarını Tamir Et Topluluk Mağaza

Hoe repareer je een gesp (ski-braces)?

Kılavuz Bilgisi

= Bitti = Eksik
İngilizce
Flemenkçe
    After a long time of use, the buckles or buckle loops can show sign of damage. These are often very simple to replace and repair, and in this guide we will demonstrate a common example from ski trousers.



     (but➡️Before you get started, it is appropriate for many other products types too)please check the safety disclaimer at the bottom of the page.
      In need of another repair? Don't worry! Check out our [link|https://www.ifixit.com/brand/intersport|other guides|new_window=true] to find quick solutions for your favourite clothing, footwear and equipment!
      ----------------------------------------
      🚨🛠️🩹 IMPORTANT SAFETY NOTICE:
      The repair guides provided on this site are intended to help you repair products on your own. While we have put a lot of care into them, all repair work carries some risk:
      # ***Safety Precautions:*** When repairing your product, take all necessary precautions to ensure your safety. Use appropriate tools and follow the instructions carefully.
      # ***Product Condition:*** Once your product has been repaired, it may not meet original compliance guidelines anymore and could potentially have issues.
      # ***Liability:*** We are not responsible for any damage or injury that may occur during the repair process or as a result of using a repaired product. You, as the repairer, assume all risks and responsibilities associated with the repair.
      By using these repair guides, you fully acknowledge and accept the potential risks and responsibilities involved.

      Kılavuz Adımları

      Adım 1 — Identificeer het defect

      De stiksels van de gesp zijn kapot, en de gesp is losgekomen.

      Adım 2 — Maak het gebied schoon

      Knip de beschadigde draden weg om het gebied schoon te maken en gereed te maken voor reparatie.

      Adım 3 — Plaats de gesp opnieuw

      Steek de gesp in de stoflus.

      Adım 4 — Stikken

      Bevestig de gesp op zijn plaats door langs de naad te naaien met de naaimachine.

      Adım 5 — Klaar en gereed voor gebruik!

      🛠️🏆👏 Gefeliciteerd! De reparatie is voltooid en je bent klaar om weer op pad te gaan!

      Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.