Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 7 kılavuzları etkileyecektir.
Adım 4 çevriliyor
Adım 4
Installation Notes: Shutter Speed Dial
-
The hole in the dial housing needs to go over the tab on the speed resistor.
-
The tab on the ISO dial needs to mate with the hole in the dial housing.
-
It can be difficult to line everything up while compressing the spring and installing the center screw. Be patient.
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.