Eşyalarını Tamir Et Topluluk Mağaza

HP All-in-one PC Model 24 Motherboard Replacement

Kılavuza Dön
İngilizce
İspanyolca
Adım 4
HP All-in-one PC Model 24 Motherboard Replacement, Unscrew and Remove the Stand: adım 0, 2 resimden 1. HP All-in-one PC Model 24 Motherboard Replacement, Unscrew and Remove the Stand: adım 0, 2 resimden 2.
Unscrew and Remove the Stand

  • Locate the Stand Screws: Turn the PC over so that the back is facing up.

  • Unscrew the Stand: Use the screwdriver to remove the screws securing the stand.

  • Remove the Stand: Once the screws are removed, carefully detached the stand from the PC (should be able to pull up and out).

  • Note: The screws can either be removed from the stand or left on the stand. Just be sure to keep them in a safe location to avoid losing them during the process.

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.