HP All-in-one PC Model 24 Motherboard Replacement

İngilizce

İspanyolca

Önceki adım Sonraki adım

Adım 10 çevriliyor

Adım 10

HP All-in-one PC Model 24 Motherboard Replacement, Removing the CPU Cooling Fan: adım 0, 3 resimden 1.

HP All-in-one PC Model 24 Motherboard Replacement, Removing the CPU Cooling Fan: adım 0, 3 resimden 2.

HP All-in-one PC Model 24 Motherboard Replacement, Removing the CPU Cooling Fan: adım 0, 3 resimden 3.

Removing the CPU Cooling Fan

Disconnect the Fan's Power Cable: Locate the fan's power cable connected to the motherboard. Gently unplug the cable by pulling on the wire very close to the connector perpendicular to the board.
Unscrew the Fan: Use a screwdriver to remove the screws that secure the cooling fan in place. There are only three screws.
Note: Keep the screws in a safe place for reassembly.
Remove the Fan: Lift the cooling fan away from the CPU and motherboard.
Cooling bar system: Do not remove this, yet.
WARNING: The device directly behind the fan is the cooling bar system. This is attached to the CPU on the motherboard. Make sure not to damage the system.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.