Eşyalarını Tamir Et Topluluk Mağaza

HP All-in-one PC Model 24 Motherboard Replacement

Kılavuza Dön
İngilizce
İspanyolca
Önceki adım Sonraki adım

Adım 13 çevriliyor

Adım 13
HP All-in-one PC Model 24 Motherboard Replacement, Removing the Ribbon Cable from the Power Button: adım 0, 2 resimden 1. HP All-in-one PC Model 24 Motherboard Replacement, Removing the Ribbon Cable from the Power Button: adım 0, 2 resimden 2.
Removing the Ribbon Cable from the Power Button

  • Release the Cable's Connector: Carefully release the ribbon cable from its connector on the motherboard. The connector has a latch, gently lift it up to release the cable. The same way as in step 6.

  • Disconnect the Ribbon Cable: Once the latch is released, gently pull the ribbon cable out its connector.

  • Note: Be sure not to pull on the cable too forcefully to avoid damaging the cable or the connector.

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.