Pentax Spotmatic Light Meter Calibration

Adım 4 çevriliyor

İngilizce

Almanca

Adım 4

Make adjustments

Use a pick to adjust the variable resistor through the opening in the top plate.
Turn it until the needle in the viewfinder is centered in the opening, indicating a proper exposure.
The adjustment resistor shown with the top cover removed.
Repeat steps 3 and 4 for several different light levels.
Since the Spotmatic only has one adjustment resistor, it may not be possible to center the needle at every light level. Make compromises as necessary.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.