Audio-Technica AT-LP120-USB Precision 500 mA Regulator Replacement

İngilizce

Korece

Adım 3 çevriliyor

Adım 3

Audio-Technica AT-LP120-USB Precision 500 mA Regulator Replacement: adım 0, 1 resimden 1.

Flip the board that was loosened from removing the four screws and go on the opposite side of where the Regulator is located. Desolder the regulator.
Remove the faulty regulator.
A new regulator will need to be soldered back on.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.