Eşyalarını Tamir Et Topluluk Mağaza

iPhone 16 Pro Max スクリーンの交換

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.

Kılavuza Dön
İngilizce
Japonca
Adım 7
iPhone 16 Pro Max Screen Installation: adım 0, 3 resimden 1. iPhone 16 Pro Max Screen Installation: adım 0, 3 resimden 2. iPhone 16 Pro Max Screen Installation: adım 0, 3 resimden 3.

  • Continue peeling away the liner from the adhesive, gently pressing the adhesive into place.

  • If you've correctly aligned the adhesive, the edges will fall perfectly into place.

  • If your adhesive is slightly misaligned, pull the long edges into alignment with the frame.

  • If the adhesive begins to crease or wrinkle, remove it and start over with fresh adhesive.

  • If you don't have another set of adhesive strips handy, it's okay to temporarily put your iPhone back together and use it normally without any adhesive. Just keep in mind that your iPhone's water resistance will be compromised until you replace the adhesive.

接着タブの裏からシールの残りを剥がして、iPhoneの下部から上部に向けて取り付けます。

接着タブの下部を正しく装着できたら、両側と上部の端も完全に合わさるはずです。接着タブがうまく本体と重ならない場合は、一度剥がして新しい交換用の接着タブで再装着してください。

手元に余分の接着タブがない場合は、応急処置として接着タブを装着しないでiPhoneを再組み立てしてください。接着タブを再装着するまで、iPhoneは防水機能を保てません。ご注意ください。

-[* black] Continue peeling away the backing from the adhesive, gently pressing the adhesive into place from the bottom of your iPhone to the top.
- [* icon_note] If you correctly aligned the lower edge of the adhesive, the side and top edges will fall perfectly into place. If the adhesive is misaligned, remove it and start over with fresh adhesive.
- [* icon_reminder] If you don't have another set of adhesive strips handy, it's okay to temporarily put your iPhone back together and use it normally without any adhesive. Just keep in mind that your iPhone's water resistance will be compromised until you replace the adhesive.
+[* black] Continue peeling away the liner from the adhesive, gently pressing the adhesive into place.
+ [* icon_note] If you've correctly aligned the adhesive, the edges will fall perfectly into place.
+ [* icon_note] If your adhesive is slightly misaligned, pull the long edges into alignment with the frame.
+ [* icon_note] If the adhesive begins to crease or wrinkle, remove it and start over with fresh adhesive.
+[* icon_note] If you don't have another set of adhesive strips handy, it's okay to temporarily put your iPhone back together and use it normally without any adhesive. Just keep in mind that your iPhone's water resistance will be compromised until you replace the adhesive.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.