Ana içeriğe geç

Remplacement de la carte mère du Sony Cyber-Shot DSC-W330

Adım 1 çevriliyor

İngilizce
Fransızca
Adım 1
Sony Cyber-Shot DSC-W330 Circuit Board Replacement: adım 0, 3 resimden 1. Sony Cyber-Shot DSC-W330 Circuit Board Replacement: adım 0, 3 resimden 2. Sony Cyber-Shot DSC-W330 Circuit Board Replacement: adım 0, 3 resimden 3.
  • Place the camera so that the lens would be facing down. Use the phillips head screwdriver to remove the small silver screw in the top right corner.

  • Gently peel back the black adhesive tape from the top edge.

  • The tape is attached to the ribbon cable. Be very careful not to tear or damage the ribbon cable when removing the tape.

  • Use the plastic opening tool to pry the black locking tab up.

  • Gently remove the ribbon cable from the connector

Placez l'appareil photo de sorte que l'objectif soit orienté vers le bas. Utilisez le tournevis cruciforme pour retirer la petite vis argentée dans le coin supérieur droit.

Décollez doucement le ruban adhésif noir du bord supérieur

Le ruban est attaché au câble ruban. Faites très attention de ne pas déchirer ou endommager le câble ruban lors du retrait de la bande.

Utilisez l'outil d'ouverture en plastique pour soulever la languette de verrouillage noire.

Retirez délicatement le câble ruban du connecteur

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.