Ana içeriğe geç

Remplacement de la carte mère du Sony Cyber-Shot DSC-W330

Adım 2 çevriliyor

İngilizce
Fransızca
Adım 2
Sony Cyber-Shot DSC-W330 Circuit Board Replacement: adım 0, 3 resimden 1. Sony Cyber-Shot DSC-W330 Circuit Board Replacement: adım 0, 3 resimden 2. Sony Cyber-Shot DSC-W330 Circuit Board Replacement: adım 0, 3 resimden 3.
  • Grasp the circuit board with your fingers and gently pull it out of the camera.

  • This will require you to work it back and forth because it is tightly secured to the camera.

  • Be careful not to damage the battery terminal connectors, they may be holding the circuit board to the battery compartment.

  • The circuit board is now removed and can be replaced if necessary.

Saisissez le circuit imprimé avec vos doigts et retirez-le doucement de l'appareil photo.

Cela vous obligera à le faire aller et venir car il est solidement fixé à la caméra.

Veillez à ne pas endommager les connecteurs des bornes de la batterie, ils peuvent maintenir le circuit imprimé contre le compartiment de la batterie.

Le circuit imprimé est maintenant retiré et peut être remplacé si nécessaire.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.