-
Open the hinge and carefully pop off the Upper LCD using your fingers.
-
Gently remove the ribbon from the hinge.
-
Though not required, the task of removing the ribbon cables becomes much easier once you remove the hinge barrel on the right side of the device.
-
Do not lose the tiny fabric and rubber water-resistant rectangles that cover the two speakers; they often fall out once the speakers are removed.
-
The screen's cover glass can be replaced or transferred to your new screen. The cover is easily scratched by metal tools; use plastic or your fingernail to separate it.
-
Adhere the cover to the new screen by using thin adhesive around the edges, or by reusing the old adhesive.
-
To reinsert the hinge piece, open the console to the last click before it's completely flat.
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.
Kılavuz Adımlarını Düzenlemek için Klavye Kısayolları:
Ctrl + N
Bir sonraki satır
Ctrl + P
Bir önceki satır
Ctrl + Shift + N
Aşağıya yeni bir satır ekle
Ctrl + Shift + P
Yukarıya yeni bir satır ekle
Ctrl + ]
Mevcut satırı girintili yap
Ctrl + [
Mevcut satır girintisini kaldır
Ctrl + D
Mevcut satırı sil
Shift + ;
Sonraki adıma git.
Shift + H
Önceki adıma git.
Bütün kısayolları göster