Ana içeriğe geç

Remplacement du panneau avant et supérieur du boîtier Canon EOS 6D

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 3 kılavuzları etkileyecektir.

İngilizce
Fransızca

Adım 14 çevriliyor

Adım 14
Canon EOS 6D Front and Top Body Panel Replacement: adım 0, 1 resimden 1.
  • A ribbon wire connects the inside of the top panel to the body of the camera.

  • Slowly lift the top panel to about an inch above the body of the camera.

  • Carefully use the flat end of the spudger to detach the ribbon wire from the top of the camera.

Un fil ruban relie l'intérieur du panneau supérieur au corps de la caméra.

Soulevez lentement le panneau supérieur à environ un pouce au-dessus du corps de la caméra.

Utilisez soigneusement l'extrémité plate du spudger pour détacher le fil ruban du haut de la caméra.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.