Ana içeriğe geç

Dell Latitude E6400 Heatsink and Thermal Paste Replacement

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.

Adım 1 çevriliyor

İngilizce
İspanyolca
Adım 1
Dell Latitude E6400 Heatsink and Thermal Paste Replacement, Opening it Up: adım 0, 3 resimden 1. Dell Latitude E6400 Heatsink and Thermal Paste Replacement, Opening it Up: adım 0, 3 resimden 2. Dell Latitude E6400 Heatsink and Thermal Paste Replacement, Opening it Up: adım 0, 3 resimden 3.
Opening it Up
  • Disconnect all chargers and accessories, and shut down or hold power button for 10 seconds until laptop shuts off.

  • Flip the laptop over, and push the two tabs shown in the photo inwards until it clicks. push battery upwards away from laptop to remove battery.

  • Using a Philips #2 screwdriver, unscrew the center screw on the back cover. The screw is captive so it will not leave the base, but will click when fully loosened.

  • Push the base cover down towards you until it slides down a little bit with a click, then lift the protruding part up to remove the cover

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.