While holding the iPhone down with one hand, pull up on the suction cup to slightly separate the front panel assembly from the rear case.
Take your time and apply firm, constant force. The display assembly is a much tighter fit than most devices.
Using a plastic opening tool, begin to gently pry the rear case down, away from the display assembly, while continuing to pull up with the suction cup.
There are several clips attaching the front panel assembly to the rear case, so you may need to use a combination of the suction cup and plastic opening tool to free the front panel assembly.

Bold
Italic
Underline
Bağlantı
一只手把 iPhone 按下的同时，把吸盘轻轻地往上拉，使前面板组件和后机壳分离。
Bold
Italic
Underline
Bağlantı
慢慢来，使用恒定的力量。显示屏组件比大多数的设备都要紧。
Bold
Italic
Underline
Bağlantı
使用塑料撬棒，开始轻轻地把后机壳撬下来，在这个过程中继续拉吸盘。
Bold
Italic
Underline
Bağlantı
前面板组件和后机壳有几个夹扣连接，所以你需要使用吸盘和撬棒工具组合。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.

iPhone 6 Plus 前面板组件更换

Adım 2 çevriliyor

Kılavuz Adımlarını Düzenlemek için Klavye Kısayolları: