Eşyalarını Tamir Et Topluluk Mağaza

Magic Bullet NutriBullet Activator Replacement

Kılavuza Dön
İngilizce
İtalyanca
Adım 4
Magic Bullet NutriBullet Activator Replacement: adım 0, 1 resimden 1.

  • Determine which activator(s) fail to work by applying pressure to them. Then, remove the two 15mm screws that hold the activators in place by using the Philips Head 2 screwdriver.

  • Only two of the three activator tabs have green micro switches that actually turn on the motor. Use a circuit tester on the power chord and press the two micro switches simultaneously to see if they complete the circuit. If not, one or both need to be replaced.

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.