Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.
Adım 6 çevriliyor
Adım 6
-
You should now be able to see the exposed motherboard and lens.
-
Remove the first ribbon cable (pictured first) with tweezers. Pull gently away from the camera.
-
Remove the second ribbon cable (pictured second) with tweezers. Pull gently away from the camera.
-
Use your fingers to gently lift the lens away from the motherboard and frame.
- | [* red] To separate the motherboard from the lens there are two ribbon cables that need to be pulled out of their ports. |
---|---|
+ | [* black] You should now be able to see the exposed motherboard and lens. |
+ | [* icon_note] To separate the motherboard and lens, you must detach two more ribbon cables. |
+ | [* red] Remove the first ribbon cable (pictured first) with tweezers. Pull gently away from the camera. |
+ | [* black] Remove the second ribbon cable (pictured second) with tweezers. Pull gently away from the camera. |
+ | [* black] Use your fingers to gently lift the lens away from the motherboard and frame. |
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.