Ana içeriğe geç

更换三星盖乐世S6的后部玻璃面板粘合胶

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.

İngilizce
Çince
Adım 2
Samsung Galaxy S6 Rear Glass Adhesive Replacement: adım 0, 3 resimden 1. Samsung Galaxy S6 Rear Glass Adhesive Replacement: adım 0, 3 resimden 2. Samsung Galaxy S6 Rear Glass Adhesive Replacement: adım 0, 3 resimden 3.
  • Lay the glass panel face-up and rotate it so that the lens holes are on your right.

  • Grasp the adhesive from both sides and align the tape over the rear glass.

  • Make sure to align the camera and heart rate sensor holes on the phone with the adhesive tape.

  • Lay the adhesive on top of the glass.

将玻璃面板内侧朝上放置,并将其旋转至镜头孔朝向你的右手边。

抓住粘合胶两侧并将其对准后部玻璃。

请确定将粘合胶对准了手机上的摄像头及心率传感器开孔。

将粘合胶平铺在玻璃上。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.