Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 2 kılavuzları etkileyecektir.
Adım 6 çevriliyor
Adım 6
-
Push a plastic card between the right-most battery cell and the upper case, cutting the adhesive between the two.
-
When using the hot iOpener method, if you encounter significant resistance to prying, stop and use the iOpener to reheat the section you're working on.
- | [* black] Push a plastic card between the right-most battery cell and the upper case, cutting the adhesive between the two. |
---|---|
+ | [* black] Push a [product|IF145-101|plastic card] between the right-most battery cell and the upper case, cutting the adhesive between the two. |
[* icon_caution] Throughout this procedure, be careful not to damage any of the battery cells with your tools. A damaged lithium-ion battery may leak dangerous chemicals and/or catch fire. Use only plastic pry tools. | |
[* black] When using the hot iOpener method, if you encounter significant resistance to prying, stop and use the iOpener to reheat the section you're working on. |
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.