Ana içeriğe geç

Reemplazo de la carcasa inferior de la Nintendo DS Lite

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 17 kılavuzları etkileyecektir.

İngilizce
İspanyolca
Adım 3
Nintendo DS Lite Lower Case Replacement: adım 0, 3 resimden 1. Nintendo DS Lite Lower Case Replacement: adım 0, 3 resimden 2. Nintendo DS Lite Lower Case Replacement: adım 0, 3 resimden 3.
  • Remove the cover from the Game Pak slot before continuing.

  • Insert the edge of a spudger in between the lower and upper case near the top right corner of the DS Lite.

  • Carefully run the spudger along the right edge of the DS Lite, creating an opening in the process.

  • Continue running the spudger along the backside of the DS Lite until the majority of the lower case has been separated from the upper case.

Retira la tapa de la ranura del Game Pak antes de continuar.

Inserta el borde de un spudger entre la caja inferior y superior cerca de la esquina superior derecha del DS Lite.

Pasa con cuidado el spudger a lo largo del borde derecho del DS Lite, creando una abertura en el proceso.

Continúa pasando el spudger por la parte trasera de la DS Lite hasta que la mayor parte de la caja inferior se haya separado de la caja superior.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.